The Rogue Toolkit - An Extensible Toolkit Aimed At Providing Penetration Testers An Easy-To-Use Platform To Deploy Access Points


The Rogue Toolkit is an extensible toolkit aimed at providing penetration testers an easy-to-use platform to deploy software-defined Access Points (AP) for the purpose of conducting penetration testing and red team engagements. By using Rogue, penetration testers can easily perform targeted evil twin attacks against a variety of wireless network types.
Rogue was originally forked from s0lst1c3's eaphammer project. The fundamental idea of the Rogue toolkit was to leverage the core concept of the eaphammer project in an alternative manner to allow for flexibility, integration and adaption to future changes to the 802.11 standards and supporting tools. Rogue is suited for the the following cases:
  • Compromising corporate accounts to be later used in impersonation attacks to gain access to corporate wireless networks.
  • To subvert network protections, such as captive portals or client to client isolation, to be able to target and compromise connected wireless devices and using compromised devices and credentials to pivot deeper into internal networks.

Usage
usage: python rogue.py -I wlan0 -H g -C 6 --auth open --internet

The Rogue Toolkit is an extensible toolkit aimed at providing penetration
testers an easy-to-use platform to deploy software-defined Access Points (AP)
for the purpose of conducting penetration testing and red team engagements. By
using Rogue, penetration testers can easily perform targeted evil twin attacks
against a variety of wireless network types.

optional arguments:
  -h, --help            show this help message and exit
  -w PCAP_FILENAME, --write PCAP_FILENAME
                        Write all collected wireless frames to a pcap file.
  --internet            Provide network access
  --auth {open,wep,wpa-personal,wpa-enterprise}
                        Specify auth type. (Default: open)
  --cert-wizard         Use this flag to create a new RADIUS cert for your AP
  --clone-wizard        Used to clone a target website
  --show-options        Display configured options.
  -I INTERFACE, --interface INTERFACE
                        The phy interface on which to create the AP

hostapd configuration:
  --driver {hostap,nl80211,atheros,wired,none,bsd}
                        Choose the hostapd-wpe driver

Attack Arguments:
  --karma               Enable Karma.
  --sslsplit            Enable sslsplit.
  --responder           Enable responder using default configuration.
  --essid-mask {0,1,2}  Send empty SSID in beacons and ignore probe request
                        frames that do not specify full SSID. 1 = send empty
                        (length=0) SSID in beacon and ignore probe request for
                        broadcast SSID 2 = clear SSID (ASCII 0), but keep the
                        original length (this may be required with some
                        clients that do not support empty SSID) and ignore
                        probe requests for broadcast SSID (Default: 0)
  --hostile-portal      Enable hostile portal.
  --hostile-mode {beef,responder}
                        Select attack type performed by hostile portal.
  --hostile-location HOSTILE_LOCATION
                        Used to specify the location of the cloned site
                        location. Note: httrack creates a new directory within
                        the destination location with the name of the site
                        cloned. (Default: /var/www/html)
  --target-file TARGET_FILE
                        Used to specify the file in which the hostile portal
                        hook will be inserted into. (Default: /index.html)
  --hostile-marker HOSTILE_MARKER
                        Specify the line in the file target file to insert the
                        web hook above. (Default: </body> )
  --hostile-hook HOSTILE_HOOK
                        Specify custom hook code to insert into the target
                        file

IEEE 802.11 related configuration:
  -B BSSID, --bssid BSSID
                        Specify access point BSSID
  -E ESSID, --essid ESSID
                        Specify access point ESSID
  -H {a,b,g,n,ac}, --hw-mode {a,b,g,n,ac}
                        Specify access point hardware mode (Default: g).
  --freq {2,5}          Specify the radio band to use (Default: 2GHz).
  -C CHANNEL, --channel CHANNEL
                        Specify access point channel. (Default: 0 - with ACS
                        to find an unused channel)
  --country {AU,US}     Configures of country of operation
  --macaddr-acl {0,1,2}
                        Station MAC address -based authentication
  --auth-algs {1,2,3}   IEEE 802.11 specifies two authentication algorithms. 1
                        allows only WPA2 authentication algorithms. 2 is WEP.
                        3 allows both.
  --wmm-enabled         Enable Wireless Multimedia Extensions
  --ieee80211d          Enabling IEEE 802.11d advertises the country_code and
                        the set of allowed channels and transmit power levels
                        based on the regulatory limits. (Default: False)
  --ieee80211h          Enables radar detection and DFS support. DFS support
                        is required for an outdoor 5 GHZ channel. (This can
                        only be used if ieee80211d is enabled). (Default:
                        False)
  --ap-isolate          Enable client isolation to prevent low-level bridging
                        of frames between associated stations in the BSS.
                        (Default: disabled)

IEEE 802.11n related configuration:
  --ht-mode {0,1,2}     Configure supported channel width set 0 = Feature
                        disabled 1 = [HT40-] (2.4 GHz = 5-13, 5 GHz =
                        40,48,56,64) 2 = [HT40+] (2.4 GHz = 1-7 (1-9 in
                        Europe/Japan), 5 GHz = 36,44,52,60) (Default = 0).
  --disable-short20     Disables Short GI for 20 MHz for HT capabilities.
  --disable-short40     Disables Short GI for 40 MHz for HT capabilities.
  --require-ht          Require stations to support HT PHY (reject association
                        if they do not). (Default: False)

IEEE 802.11ac related configuration:
  --vht-width {0,1,2,3}
                        VHT channel width (Default: 1).
  --vht-seg0_index VHT_OPER_CENTR_FREQ_SEG0_IDX
                        index 42 gives center freq 5.210 GHz (Default: 42).
  --vht-seg1_index VHT_OPER_CENTR_FREQ_SEG1_IDX
                        index 159 gives center freq 5.795 GHz (Default: 159).
  --require-vht         Require stations to support VHT PHY (reject
                        association if they do not) (Default: disabled).

IWPA/IEEE 802.11i configuration:
  --wpa-passphrase WPA_PASSPHRASE
                        Specify the Pre-Shared Key for WPA network.
  --wpa {1,2,3}         Specify WPA type (Default: 2).
  --wpa-pairwise {CCMP,TKIP,CCMP TKIP}
                        (Default: 'CCMP TKIP')
  --rsn-pairwise {CCMP,TKIP,CCMP TKIP}
                        (Default: 'CCMP')

WEP authentication configuration:
  --wep-key-version {0,1,2,3}
                        Determine the version of the WEP configuration
  --wep-key WEP_KEY     Determine the version of the WEP configuration

IEEE 802.1X-2004 configuration:
  --ieee8021x           Enable 802.1x
  --eapol-version {1,2}
                        IEEE 802.1X/EAPOL version
  --eapol-workaround    EAPOL-Key index workaround (set bit7) for WinXP
                        Supplicant

RADIUS client configuration:
  --log-badpass         logs password if it's rejected
  --log-goodpass        logs password if it's correct
  --own-address OWN_IP_ADDR
                        The own IP address of the access point (Default:
                        127.0.0.1)
  --auth-server-addr AUTH_SERVER_ADDR
                        IP address of radius authentication server (Default:
                        127.0.0.1)
  --auth-secret AUTH_SERVER_SHARED_SECRET
                        Radius authentication server shared secret (Default:
                        secret)
  --auth-server-port AUTH_SERVER_PORT
                        Networking port of radius authentication server
                        (Default: 1812)
  --acct-server-addr ACCT_SERVER_ADDR
                        IP address of radius accounting server (Default:
                        127.0.0.1)
  --acct-secret ACCT_SERVER_SHARED_SECRET
                        Radius accounting server shared secret
  --acct-server-port ACCT_SERVER_PORT
                        Networking port of radius accounting server (Default:
                        1813)
  --radius-proto {udp,tcp,*}
                        (Default: *)
  --eap-type {fast,peap,ttls,tls,leap,pwd,md5,gtc}
                        (Default: md5)
  --print-creds         Print intercepted credentials

External DHCP configuration:
  --lease DEFAULT_LEASE_TIME
                        Define DHCP lease time (Default: 600)
  --max-lease MAX_LEASE_TIME
                        Define max DHCP lease time (Default: 7200)
  --prim-name-server PRIMARY_NAME_SERVER
                        Define primary name server (Default: 8.8.8.8)
  --sec-name-server SECONDARY_NAME_SERVER
                        Define secondary name server (Default: 8.8.4.4)
  --subnet DHCP_SUBNET  (Default: 10.254.239.0)
  --route-subnet ROUTE_SUBNET
                        (Default: 10.254.239)
  --netmask DHCP_NETMASK
                        (Default: 255.255.255.0)
  --ip-address IP_ADDRESS
                        (Default: 10.254.239.1)
  --secondary-interface SECONDARY_INTERFACE
                        Used to specify the second phy interface used to
                        bridge the hostapd-wpe interface (-I) with another
                        network (Default: eth0)
  --pool-start DHCP_POOL_START
                        (Default: 10.254.239.10)
  --pool-end DHCP_POOL_END
                        (Default: 10.254.239.70)

Website cloning configuration:
  --clone-target CLONE_TARGET
                        Used to specify target website to clone (e.g.
                        https://www.example.com/)
  --clone-dest CLONE_DEST
                        Specify the location of the web root for the hostile
                        portal, it is recommended that you clone to your web
                        root. Note: httrack will create a directory in this
                        location with the name of the site cloned. (Default:
                        /var/www/html)

sslsplit configuration:
  --cert-nopass         Generate a x.509 Certificate with no password for the
                        purpose of sslsplit.
  --encrypted-port SSLSPLIT_ENCRYPTED_PORT
                        Specify port for encrypted web communication (TCP/443)
                        be redirected to. (Default: 8443)

HTTPD configuration:
  --httpd-port HTTPD_PORT
                        defines the port for httpd service to listen on.
                        (Default: 80)
  --httpd-ssl-port HTTP_SSL_PORT
                        Defines port for SSL-enabled httpd service to listen
                        on. (Default: 443)
  --ssl                 Enable ssl version of rogue httpd. When enabled,
                        --httpd-ssl-port overwrites --httpd-port. (Default:
                        443)


The Rogue Toolkit - An Extensible Toolkit Aimed At Providing Penetration Testers An Easy-To-Use Platform To Deploy Access Points The Rogue Toolkit - An Extensible Toolkit Aimed At Providing Penetration Testers An Easy-To-Use Platform To Deploy Access Points Reviewed by Zion3R on 6:12 PM Rating: 5